GROUNDWORK — Replace a halogen headlight bulb Task: fit-halogen-headlight | Content version 2.0.0 Source page: https://csl-12-auto-repair.pages.dev/tasks/fit-halogen-headlight/ MODEL / APPLICABILITY [{"modelId":"fit-2015-us","market":"US","year":2015,"engine":"1.5L gasoline","configurations":["halogen"]}] EXCLUSIONS Other model years and markets; imported Jazz or Fit Hybrid; modified or aftermarket components with a different procedure. Requires confirmed configuration: halogen. PREPARE [ ] Park in a safe place away from traffic. Work with the vehicle stationary, parking brake set and ignition off unless a step explicitly calls for a parked functional check. [ ] Is the original halogen assembly confirmed, completely cool, and reachable from above? [ ] Keep children and pets away from tools, fluids and coin cells. Never enter underneath the vehicle. [ ] Clean gloves [ ] Good lighting [ ] Correct 60/55 W H4/HB2 halogen bulb for the original assembly OBSERVE & RECORD Observation date: __________ Vehicle / equipment confirmed: __________ Record the bulb specification, retention-window check, weather seal and separate high/low response. Lamp side and original halogen assembly: __________ Fitted bulb rating/type: __________ Hold-down, seal and coupler observations: __________ Parked beam result: __________ | Choices: Both modes work; One mode fails; Both fail; Not tested Before care: __________ STEPS 1. [ ] Switch headlights and ignition off and let the bulb cool. Verify the original assembly uses the manual’s 60/55 W H4/HB2 halogen bulb. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 2. [ ] Remove the electrical coupler and rubber weather seal from the back of the lamp. Avoid pulling wires. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 3. [ ] Release the hold-down wire and remove the bulb. Handle the replacement only by its base and protect the glass from skin or hard objects. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 4. [ ] Insert the matching new bulb. Refit the hold-down wire with its end on the knob in the slot, checking through the inspection window. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=376 | PDF page 376 5. [ ] Reinstall the weather seal and then the coupler. Make a parked high/low-beam function check with the hood securely closed. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=376 | PDF page 376 6. [ ] If it remains dark, the connector is damaged or seating is uncertain, stop and arrange inspection. Leave aim adjustment to a qualified technician. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 7. [ ] Record the bulb specification, retention-window check, weather seal and separate high/low response. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 DECISION CHECKS Is the original halogen assembly confirmed, completely cool, and reachable from above? Yes — ready for this check → Continue with the steps, stopping if the real component differs from the manual. Not yet / not sure → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. Modified / LED assembly, burned connector or inaccessible retainer → Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. How did the stationary high/low-beam check turn out? Both modes work with the bulb retained, seal seated and connector secure → Did both beam modes work after the bulb, seal and coupler were positively seated? Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. → Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. I have only prepared the plan → Plan prepared; no physical maintenance result recorded. Did both beam modes work after the bulb, seal and coupler were positively seated? Both modes work; retention and seal confirmed → Both modes work with the bulb retained, seal seated and connector secure The observation or repeat check is still incomplete → Plan prepared; no physical maintenance result recorded. A mode fails, flickers or the seating remains uncertain → Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. RECHECK At a later parked lighting check, do both modes still operate without flicker, moisture entry or abnormal aim? After care: __________ Retest: not checked / improved / unchanged / worse If an earlier condition changes, reassess the later checks and result. RESULT CHECK How did the stationary high/low-beam check turn out? Both modes work with the bulb retained, seal seated and connector secure Record only the result you actually observed. A saved web checklist is not confirmation that a vehicle has been repaired. Did both beam modes work after the bulb, seal and coupler were positively seated? At a later parked lighting check, do both modes still operate without flicker, moisture entry or abnormal aim? STOP CONDITIONS Modified / LED assembly, burned connector or inaccessible retainer Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. A part, label, connector or fastener differs from the cited manual; access requires raising the vehicle; you cannot identify the correct component. SERVICE HANDOFF Take the recorded observations, their dates and any actual work history to the service provider. Still dark, insecure seating, damaged wiring or abnormal aim: arrange lighting service. Notes: __________ SOURCES 2015 Honda Fit Owner’s Manual — Halogen Headlight Bulbs, printed pp.373–374 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=375 | PDF page 375 Source checked 2026-10-04 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. 2015 Honda Fit Owner’s Manual — Headlight Retention and Reassembly, printed p.374 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=376 | PDF page 376 Source checked 2026-10-13 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. This blank plan records no completed maintenance or verified repair.