GROUNDWORK CARE PACK — Fit: restore front wiping and record visibility Pack: fit-wiper-restoration | Version 2.0.0 For visibly deteriorated original front rubbers: inspect, fit matching rubbers and verify the wet-glass result. A different holder or intact-looking but ineffective blade stays an inspection case. Source page: https://csl-12-auto-repair.pages.dev/packs/fit-wiper-restoration/ Vehicle: fit-2015-us ORDERED STAGES 1. Locate the worn wiping edge Identify actual deterioration, the affected viewing area and any loose arm or damaged glass. Record: A driver/passenger damage and visibility record supporting the replacement decision. Date: __________ | Observation / outcome: __________ [ ] Inspect streaking windshield wipers — https://csl-12-auto-repair.pages.dev/tasks/fit-wiper-streaks/ 2. Fit and retain matching front rubbers Follow the original-holder procedure and verify each tab/indent engagement before operation. Record: Both rubber matches, retention observations and supported arm-lowering checks. Date: __________ | Observation / outcome: __________ [ ] Replace front wiper blade rubber — https://csl-12-auto-repair.pages.dev/tasks/fit-front-wiper-rubber/ 3. Compare the same viewing area Use the safe wet-glass result to decide whether the observed streaking was resolved. Record: Before/after wiping comparison and any remaining streak, scratch or loose-movement request. Date: __________ | Observation / outcome: __________ [ ] Replace front wiper blade rubber — https://csl-12-auto-repair.pages.dev/tasks/fit-front-wiper-rubber/ FINAL REVIEW Both fitted holders match the original procedure. The rubber and holder retention is confirmed before testing. A satisfactory wet-glass result is recorded; unresolved visibility is not marked repaired. HANDOFF NOTES Identify the originally affected blade and viewing area.: __________ Record both fitted rubber/holder matches.: __________ Describe the final wet-glass result and when it will next be checked.: __________ COMPLETE TASK PLANS GROUNDWORK — Inspect streaking windshield wipers Task: fit-wiper-streaks | Content version 2.0.0 Source page: https://csl-12-auto-repair.pages.dev/tasks/fit-wiper-streaks/ MODEL / APPLICABILITY [{"modelId":"fit-2015-us","market":"US","year":2015,"engine":"1.5L gasoline","configurations":["all","standard-key","smart-key","halogen","alloy"]}] EXCLUSIONS Other model years and markets; imported Jazz or Fit Hybrid; modified or aftermarket components with a different procedure. PREPARE [ ] Park in a safe place away from traffic. Work with the vehicle stationary, parking brake set and ignition off unless a step explicitly calls for a parked functional check. [ ] Are the ignition and wipers off, with both blades safely resting on the windshield? [ ] Keep children and pets away from tools, fluids and coin cells. Never enter underneath the vehicle. [ ] Good lighting [ ] Soft cloth to protect glass [ ] No replacement part required for this inspection. OBSERVE & RECORD Observation date: __________ Vehicle / equipment confirmed: __________ Describe which edge is worn and which viewing area streaks; keep visible damage separate from an assumed cause. Rubber condition: __________ | Choices: Deteriorated; Intact-looking; Unable to inspect Blade and streaked viewing area: __________ Loose arm, metal contact or glass damage: __________ Existing wet-glass visibility observation: __________ Before care: __________ STEPS 1. [ ] Switch the wipers and ignition off. Inspect both rubber edges in place; do not move the arms across the glass by hand. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 2. [ ] Look for splits, missing rubber, deterioration or metal that could contact the windshield. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 3. [ ] Use your already-observed streaks and the rubber condition together. The manual links deteriorated rubber to streaks and possible scratching. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 4. [ ] If rubber is deteriorated, prepare the front-rubber replacement task and confirm your holder design. If no damage is visible but poor wiping persists, seek inspection rather than assuming a motor fault. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 5. [ ] Leave blades supported on the glass and record whether replacement preparation or service is the next step. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 6. [ ] Describe which edge is worn and which viewing area streaks; keep visible damage separate from an assumed cause. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 DECISION CHECKS Are the ignition and wipers off, with both blades safely resting on the windshield? Yes — ready for this check → Continue with the steps, stopping if the real component differs from the manual. Not yet / not sure → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. Bare metal contacts glass, the arm is loose or glass is damaged → Loose arm, glass contact, unclear cause or continuing poor wiping: arrange inspection before relying on the wipers. What did the stationary rubber inspection show? Rubber is split, missing or visibly deteriorated → Does the observed rubber condition support replacement preparation without loose-arm or glass damage? Rubber looks intact; no metal touching glass → Does wiping still leave streaks that impair the view, despite no visible rubber damage? Loose arm, glass damage or bare metal → Loose arm, glass contact, unclear cause or continuing poor wiping: arrange inspection before relying on the wipers. I cannot inspect the rubber safely → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. I have only prepared the plan → Plan prepared; no physical maintenance result recorded. Does wiping still leave streaks that impair the view, despite no visible rubber damage? Yes, the view remains impaired → Cause remains unresolved. Have wiping performance inspected before relying on the wipers for visibility; intact-looking rubber does not establish a motor fault. No current streaking or impairment observed → No current defect or impairment observed. Keep monitoring; replacement is not established by this inspection. I have not made a safe wet-glass observation → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. Does the observed rubber condition support replacement preparation without loose-arm or glass damage? Worn rubber confirmed; correct replacement path prepared → Worn / deteriorated rubber identified; the correct replacement task is the next step The observation or repeat check is still incomplete → Plan prepared; no physical maintenance result recorded. Metal contact, loose arm or cause remains uncertain → Loose arm, glass contact, unclear cause or continuing poor wiping: arrange inspection before relying on the wipers. RECHECK After the selected replacement or inspection, does a safe wet-glass observation show clear wiping and secure retention? After care: __________ Retest: not checked / improved / unchanged / worse If an earlier condition changes, reassess the later checks and result. RESULT CHECK What did the stationary rubber inspection show? Worn / deteriorated rubber identified; the correct replacement task is the next step Record only the result you actually observed. A saved web checklist is not confirmation that a vehicle has been repaired. Does the observed rubber condition support replacement preparation without loose-arm or glass damage? After the selected replacement or inspection, does a safe wet-glass observation show clear wiping and secure retention? STOP CONDITIONS Bare metal contacts glass, the arm is loose or glass is damaged Loose arm, glass contact, unclear cause or continuing poor wiping: arrange inspection before relying on the wipers. A part, label, connector or fastener differs from the cited manual; access requires raising the vehicle; you cannot identify the correct component. SERVICE HANDOFF Take the recorded observations, their dates and any actual work history to the service provider. Loose arm, glass contact, unclear cause or continuing poor wiping: arrange inspection before relying on the wipers. Notes: __________ SOURCES 2015 Honda Fit Owner’s Manual — Checking and Maintaining Wiper Blades, printed pp.380–383 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 Source checked 2026-10-04 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. This blank plan records no completed maintenance or verified repair. GROUNDWORK — Replace front wiper blade rubber Task: fit-front-wiper-rubber | Content version 2.0.0 Source page: https://csl-12-auto-repair.pages.dev/tasks/fit-front-wiper-rubber/ MODEL / APPLICABILITY [{"modelId":"fit-2015-us","market":"US","year":2015,"engine":"1.5L gasoline","configurations":["all","standard-key","smart-key","halogen","alloy"]}] EXCLUSIONS Other model years and markets; imported Jazz or Fit Hybrid; modified or aftermarket components with a different procedure. PREPARE [ ] Park in a safe place away from traffic. Work with the vehicle stationary, parking brake set and ignition off unless a step explicitly calls for a parked functional check. [ ] Do both fitted holders match the manual’s tab-retained design, and is matching rubber available? [ ] Keep children and pets away from tools, fluids and coin cells. Never enter underneath the vehicle. [ ] Soft glass-protection cloth [ ] Good lighting [ ] Replacement rubber verified to match each fitted original holder; no guessed length OBSERVE & RECORD Observation date: __________ Vehicle / equipment confirmed: __________ Record each rubber/holder match and both retention checks before the wet-glass observation. Original tab holder and replacement-rubber match: __________ Driver and passenger tab engagement: __________ Wet-glass wipe result by blade: __________ Scratch, chatter, loose movement or remaining streak: __________ Before care: __________ STEPS 1. [ ] Turn ignition and wipers off. Raise the driver-side arm first, then the passenger side, supporting each arm to protect the glass. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=128 | PDF page 128 2. [ ] Hold the lock tab and slide the blade assembly from its arm; do not let an unsupported arm snap down. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 3. [ ] Pull the tabbed rubber end out of its holder. Compare the new rubber with the removed piece and stop if its profile or retention differs. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=383 | PDF page 383 4. [ ] Feed the new rubber from the holder’s bottom end, ensuring its tab fits the indent at the top. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=383 | PDF page 383 5. [ ] Slide the assembly securely onto the arm. Lower the passenger-side arm first, then the driver side, slowly and by hand. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=383 | PDF page 383 6. [ ] With all hands clear, test on a wetted windshield while parked. A loose blade, scratching or continuing poor wiping needs inspection. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=128 | PDF page 128 7. [ ] Record each rubber/holder match and both retention checks before the wet-glass observation. https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=128 | PDF page 128 DECISION CHECKS Do both fitted holders match the manual’s tab-retained design, and is matching rubber available? Yes — ready for this check → Continue with the steps, stopping if the real component differs from the manual. Not yet / not sure → Preparation saved. Return when the condition is confirmed; leave the vehicle untouched. Aftermarket attachment, bent arm or a damaged holder → Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. How did the fitted blades behave on wet glass? Both securely retained and wiping without loose movement or scratching → Are both tabs engaged and both blades secure after the wet-glass test? Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. → Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. I have only prepared the plan → Plan prepared; no physical maintenance result recorded. Are both tabs engaged and both blades secure after the wet-glass test? Both blades retained; clear wet-glass result → Both securely retained and wiping without loose movement or scratching The observation or repeat check is still incomplete → Plan prepared; no physical maintenance result recorded. Loose blade, scratching or retention cannot be confirmed → Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. RECHECK With hands clear and glass wet, do both blades stay attached and wipe without scratching or loose movement? After care: __________ Retest: not checked / improved / unchanged / worse If an earlier condition changes, reassess the later checks and result. RESULT CHECK How did the fitted blades behave on wet glass? Both securely retained and wiping without loose movement or scratching Record only the result you actually observed. A saved web checklist is not confirmation that a vehicle has been repaired. Are both tabs engaged and both blades secure after the wet-glass test? With hands clear and glass wet, do both blades stay attached and wipe without scratching or loose movement? STOP CONDITIONS Aftermarket attachment, bent arm or a damaged holder Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. A part, label, connector or fastener differs from the cited manual; access requires raising the vehicle; you cannot identify the correct component. SERVICE HANDOFF Take the recorded observations, their dates and any actual work history to the service provider. Blade loose, retention uncertain or scratching: stop using the wipers and have the fit checked. Notes: __________ SOURCES 2015 Honda Fit Owner’s Manual — Checking and Maintaining Wiper Blades, printed pp.380–383 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 Source checked 2026-10-04 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. 2015 Honda Fit Owner’s Manual — Front Wiper Rubber Retention, printed p.381 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=383 | PDF page 383 Source checked 2026-10-13 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. 2015 Honda Fit Owner’s Manual — Front Wipers and Washers, printed p.126 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=128 | PDF page 128 Source checked 2026-10-13 Copyright retained by manufacturer; factual reference only. Original wording and schematic; no OEM images or manual redistribution. This blank plan records no completed maintenance or verified repair. PACK SOURCES 2015 Honda Fit Owner’s Manual — Checking and Maintaining Wiper Blades, printed pp.380–383 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=382 | PDF page 382 | Source checked 2026-10-04 2015 Honda Fit Owner’s Manual — Front Wiper Rubber Retention, printed p.381 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=383 | PDF page 383 | Source checked 2026-10-13 2015 Honda Fit Owner’s Manual — Front Wipers and Washers, printed p.126 https://techinfo.honda.com/rjanisis/pubs/OM/AH/A5A1515OM/enu/A5A1515OM.pdf#page=128 | PDF page 128 | Source checked 2026-10-13 Blank plan only. A checked stage records preparation, observation or a next step; it does not certify a physical repair.